Ceramic Filter Group

Ceramic Filter Group

Product Description Ceramic filter group Ceramic vacuum filter component is our company in cooperation with several ceramic research institute, digesting and absorbing the domestic and foreign advanced technology research and development to create efficient environmentally friendly products,...

Send Inquiry

Product Details

Product Description
Ceramic filter group
Ceramic vacuum filter component is our company in cooperation with several ceramic research institute, digesting and absorbing the domestic and foreign advanced technology research and development to create efficient environmentally friendly products,  white ceramic plates bulk widely used in steel, iron, lead and zinc, nickel, aluminium dehydration of all kinds of mineral concentrate and tailings dewatering .
 
Again early firing technology, our company has developed a new process, the ceramic plates is made of whole repression by forming, avoiding the tin caused by permanent adhesive joint clogged pores with tinea, strength is not high, the phenomenon such as easy to broken .
image001.jpg

Technical Specification

Place of Origin

Jiangsu,China

Type

Ceramic plates

Application

Industrial ceramic

Material

Alumina Ceramic

Model Number

1mm,2mm,3mm,4mm,5mm,6mm/12

Brand Name

SHENKE

The sector plate width

338mm

Installation center distance

276mm

The fan-shaped plate width

555mm

The sector plate height

441mm

The sector plate thickness

30mm

The amount of filtering

1200-1320kg/h.mm

Run the recoil pressure

0.1Mpa-0.12Mpa

Degree of balance

0.01

Each plate spacing

5mm ±2

Disc face run out

Less than or equal to 0.025


Unit: mm
L1:lower width of ceramic plate L2:center distance of the installation
L3:upper width of ceramic plate B:total height of ceramic plate
Remark : The above size of ceramic plate is our regular size, our company can also be customized according to customer’s requirements.

Production Process
Originating from the inorganic membrane technique .
1. Higher density of framework and strength of membranous layer with good resistance against pressure and corrosion.
2. higher percentage of open area and bigger production capacity with higher filtration precision and lower vacuum energy consumption .Refined materials are integrated together as a whole without using adhesive.
3. Numerous generative methods are available like cleaning at hi-temperature or hi-pressure or in organic solvent,with good recycling effect and much prolonged service life
image003.jpg

Performance characteristics
Microporous ceramic filter medium has high temperature resistance, corrosion resistance, no deformation, easy cleaning and regeneration, high mechanical strength,
Precipitation + microporous ceramic filter technology, novel design, simple construction, economical and practical, boilers and industrial boilers by using this technology, processing more than 150 small and medium sized power plant, life boiler slag washing wastewater, suspended solids removal rate reached more than 91-97%, the removal rate of COD reached to 89-95%, the export of suspended matter concentration in general about 10-50mg the water is clear and transparent, all reached an emission standard, realize the closed recycling and zero discharge.

Inquiry