Model NO.: MCSIL-H25
Material: Silicone Rubber
Form: Liquid Rubber
Viscosity: 30000 Cps
Curing Agent: 2%
Curing Time: 4-6 Hrs
Transport Package: 25kg, 200kg
Raw Material: Synthetic Rubber
Appearance: Liquid White
Hardness: 25-28 Shore a
Pot Life: 30 Mins
Trademark: MC Silicone
Specification: MSDS, REACH
HS Code: 3910000000
Brief Introduction of Two component silicone elastomer for mould making:
Two component silicone elastomer for mould making finds many applications across a wide range of industries using various casting mediums. Silicone is chosen for is fine reproduction of detail, versatility, ease of use and physical strength.
Two component silicone elastomer for mould making find applications for moulding a variety of materials some are shown below,
Wax: Candles and use in the lost wax process for bronze casting
Polyurethane: Mirror and picture frames, architectural mouldings
Polyester resin: Giftware, figurines, sculptures
Plaster: Covings and cornices, film studios, figurines, fireplaces
Ceramics: Earthenware pottery
Low melt alloys: Toys, models
Stone filled resins: Replication of works of art, fireplaces
Advantages of Two component silicone elastomer for mould making:
Exceptional fluidity and good operability, easy to demold.
Cures at room temperature within 3-4 hours (assuming constant temp of 25 degrees C).
Good tensile and tear strength, low shrinkage (<0.3%)
High duplication levels or longevity
Good resistance to weather, temperature, aging, acid.
Long shelf life (10 months at least) if kept at constant temperatures.
Storage ofTwo component silicone elastomer for mould making:
Two component silicone elastomer for mould making is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about 12 months from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.
Package of Two component silicone elastomer for mould making:
Part A base silicone: 20kg/drum, 25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 800g/bottle, 1kg/bottle
Professional factory of Two component silicone elastomer for mould making:
We are manufacturer, and specialized in manufacturing different hardness, different viscosity silicone rubber series, we are competitive in price with good quality.
Should you have any question, please feel free to contact us.
Need more information , please feel free to contact us .
Mob : 008615802546505
|Pot life||30-40 mins|
|Curing time||4-6 hrs|
|Hardness||25-28 shore A|
|Tensile strength||4 Mpa|
|Tear Strength||30 N/mm|